三层交换实现VLAN互通-创新互联

三层交换技术：二层交换技术+三层转发技术。它解决了局域网中网段划分之后，网段中子网必须依赖路由器进行管理的局面，解决了传统路由器低速、复杂所造成的网络瓶颈问题。

公司主营业务：成都网站设计、成都网站建设、移动网站开发等业务。帮助企业客户真正实现互联网宣传，提高企业的竞争能力。成都创新互联是一支青春激扬、勤奋敬业、活力青春激扬、勤奋敬业、活力澎湃、和谐高效的团队。公司秉承以“开放、自由、严谨、自律”为核心的企业文化，感谢他们对我们的高要求，感谢他们从不同领域给我们带来的挑战，让我们激情的团队有机会用头脑与智慧不断的给客户带来惊喜。成都创新互联推出息县免费做网站回馈大家。

三层交换实现VLAN互通

实验需求：

C1和C4属于VLAN10，C2、C3属于VLAN20；
三层交换实现PC间互通；
R2配置静态路由实现全网互通；

实验步骤：

实验所用：Cisco GNS3

1.SW1配置

SW1#confi t //进入全局配置模式;

Enter configuration commands, one per line. End with CNTL/Z.

SW1(config)#vlan 10,20 //批量添加VLAN;

SW1(config-vlan)#exit

SW1(config)#int f1/1 //进入物理接口fa1/1;

SW1(config-if)#switchport access vlan 10 //添加VLAN10;

SW1(config-if)#no shut //激活端口;

SW1(config)#int f1/2 //进入接口fa1/2;

SW1(config-if)#switchport access vlan 20 //添加VLAN20;

SW1(config-if)#no shut //激活端口;

SW1(config)#int f1/5 //进入接口fa1/5;

SW1(config-if)#switchport mode trunk //中继TRUNK口;

SW1(config-if)#

*Mar 1 00:35:23.195: %DTP-5-TRUNKPORTON: Port Fa1/5 has become dot1q trunk

SW1(config)#int f1/0 //进入接口fa1/0;

SW1(config-if)#switchport mode trunk //中继TRUNK口;

SW1(config-if)#

*Mar 1 00:39:33.223: %DTP-5-TRUNKPORTON: Port Fa1/0 has become dot1q trunk

2.SW2配置

SW2#confi t //全局配置模式

Enter configuration commands, one per line. End with CNTL/Z.

SW2(config)#vlan 10,20 //批量添加VLAN;

SW2(config-vlan)#exit

SW2(config)#int f1/3 //进接口fa1/3;

SW2(config-if)#switchport access vlan 20 //添加VLAN20;

SW2(config-if)#no shut //激活端口;

SW2(config)#int f1/5 //进fa1/5端口;

SW2(config-if)#switchport mode trunk //配置中继端口;

SW2(config-if)#

*Mar 1 00:36:20.659: %DTP-5-TRUNKPORTON: Port Fa1/5 has become dot1q trunk

3.M1配置

M1#confi t //全局配置模式;

Enter configuration commands, one per line. End with CNTL/Z.

M1(config)#int f1/0 //进接口fa1/0;

M1(config-if)#switchport mode trunk //配置中继TRUNK;

M1(config-if)#

*Mar 1 00:41:48.443: %DTP-5-TRUNKPORTON: Port Fa1/0 has become dot1q trunk

M1(config-if)#exit

M1(config)#vlan 10,20 //批量添加VLAN;

M1(config-vlan)#exit

M1(config)#int f1/4 //进接口fa1/4;

M1(config-if)#switchport access vlan 10 //添加VLAN10;

M1(config)#int vlan10 //进入VLAN10虚拟接口;

*Mar 1 00:44:50.479: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to up

M1(config-if)#ip addr 192.168.1.1 255.255.255.0 //配置网关IP地址;

M1(config-if)#int vlan20 //进入VLAN20虚拟接口;

*Mar 1 00:45:24.131: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan20, changed state to up

M1(config-if)#ip addr 192.168.2.1 255.255.255.0 //配置网关IP地址;

M1(config)#int f1/10 //进接口fa1/10;

M1(config-if)#no switchport //二层端口转三层端口;

M1(config-if)#ip add 10.0.0.1 255.255.255.0 //配置IP地址;

M1(config-if)#

*Mar 1 00:54:19.367: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/10, changed state to up

M1(config-if)#no shut //端口激活;

M1(config)#ip route 0.0.0.0 0.0.0.0 10.0.0.2 //配置默认静态路由;

4.PC配置

VPCS[1]> ip 192.168.1.10 192.168.1.1 //配置C1 IP地址及网关;

Checking for duplicate address...

PC1 : 192.168.1.10 255.255.255.0 gateway 192.168.1.1

VPCS[1]> 2

VPCS[2]> ip 192.168.2.20 192.168.2.1 //配置C2 IP地址及网关;

Checking for duplicate address...

PC2 : 192.168.2.20 255.255.255.0 gateway 192.168.2.1

VPCS[2]> 3

VPCS[3]> ip 192.168.2.30 192.168.2.1 //配置C3 IP地址及网关;

Checking for duplicate address...

PC3 : 192.168.2.30 255.255.255.0 gateway 192.168.2.1

VPCS[3]> 4

VPCS[4]> ip 192.168.1.40 192.168.1.1 //配置C4 IP地址及网关;

Checking for duplicate address...

PC4 : 192.168.1.40 255.255.255.0 gateway 192.168.1.1

5.测试PC间通信

VPCS[4]> ping 192.168.1.10 //测试C1和C4连通性;

192.168.1.10 icmp_seq=1 ttl=64 time=2.002 ms

192.168.1.10 icmp_seq=2 ttl=64 time=2.967 ms

192.168.1.10 icmp_seq=3 ttl=64 time=2.003 ms

192.168.1.10 icmp_seq=4 ttl=64 time=3.008 ms

192.168.1.10 icmp_seq=5 ttl=64 time=2.003 ms

VPCS[4]> 3

VPCS[3]> ping 192.168.2.20 //测试C3、C2连通性;

192.168.2.20 icmp_seq=1 ttl=64 time=3.004 ms

192.168.2.20 icmp_seq=2 ttl=64 time=2.069 ms

VPCS[3]> ping 192.168.1.10 //测试C3、C1连通性;

192.168.1.10 icmp_seq=1 timeout

192.168.1.10 icmp_seq=2 ttl=63 time=17.949 ms

192.168.1.10 icmp_seq=3 ttl=63 time=17.967 ms

192.168.1.10 icmp_seq=4 ttl=63 time=55.063 ms

192.168.1.10 icmp_seq=5 ttl=63 time=28.966 ms

VPCS[3]>

VPCS[3]> 4

VPCS[4]> ping 192.168.2.20 //测试C4、C2连通性;

192.168.2.20 icmp_seq=1 timeout

192.168.2.20 icmp_seq=2 ttl=63 time=47.050 ms

192.168.2.20 icmp_seq=3 ttl=63 time=23.026 ms

6.R1配置

R1#confi t //全局配置模式;

Enter configuration commands, one per line. End with CNTL/Z.

R1(config)#int f0/1 //进fa0/1接口;

R1(config-if)#ip add 10.0.0.2 255.255.255.0 //配置IP地址及子网掩码;

R1(config-if)#no shut //激活端口;

R1(config-if)#

*Mar 1 00:55:56.307: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up

*Mar 1 00:55:57.307: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

R1(config)#int f0/0 //进入接口FA0/0;

R1(config-if)#ip add 12.0.0.2 255.255.255.0 //配置IP地址、子网掩码;

R1(config-if)#no shut //激活端口;

R1(config-if)#

*Mar 1 00:58:54.163: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

*Mar 1 00:58:55.163: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

R1(config)#ip route 192.168.1.0 255.255.255.0 10.0.0.1 //配置默认静态路由;

R1(config)#ip route 192.168.2.0 255.255.255.0 10.0.0.1

7.R2配置

R2#confi t //全局配置模式;

Enter configuration commands, one per line. End with CNTL/Z.

R2(config)#int f0/0 //进入f0/0接口;

R2(config-if)#ip add 12.0.0.3 255.255.255.0 //配置IP地址及子网掩码;

R2(config-if)#no shut //激活端口;

R2(config-if)#

*Mar 1 01:00:11.707: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

*Mar 1 01:00:12.707: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

R2(config)#ip route 0.0.0.0 0.0.0.0 12.0.0.2 //配置静态路由;

8.测试互通

VPCS[3]> ping 12.0.0.3 //测试C3、R2连通性;

12.0.0.3 icmp_seq=1 ttl=253 time=137.756 ms

12.0.0.3 icmp_seq=2 ttl=253 time=93.753 ms

12.0.0.3 icmp_seq=3 ttl=253 time=109.381 ms

12.0.0.3 icmp_seq=4 ttl=253 time=140.631 ms

12.0.0.3 icmp_seq=5 ttl=253 time=140.633 ms

VPCS[3]> 1

VPCS[1]> ping 12.0.0.2 //测试C1、R1连通性;

12.0.0.2 icmp_seq=1 ttl=254 time=62.501 ms

12.0.0.2 icmp_seq=2 ttl=254 time=93.764 ms

12.0.0.2 icmp_seq=3 ttl=254 time=78.126 ms

12.0.0.2 icmp_seq=4 ttl=254 time=78.126 ms

12.0.0.2 icmp_seq=5 ttl=254 time=93.756 ms

另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。

文章题目：三层交换实现VLAN互通-创新互联
网站路径：http://jkwzsj.com/article/diigop.html

三层交换实现VLAN互通-创新互联

其他资讯