189 8069 5689
现代软件工程 结对编程 (II) 电梯调度
Pair Project II: Elevator Scheduler
<现代软件工程> 的结对编程作业, 作者: 邹欣
怎样设计API? 怎样从不同角度考虑需求? 怎样对不同的设计进行评估?
怎样做设计一个测试框架来测试众多解决方案? 如何驱动这样的测试框架?
怎样和伙伴合作, 快速有效地完成这些挑战?
这就是我们这次小项目要练习的。
Design and implement an Elevator Scheduler to aim for both correctness and performance, in managed code.
Skills to practice:
a) Requirement Analysis
需求分析
b) High level design (interface, information hiding, loose coupling)
程序API 设计, 信息隐藏, 耦合
c) Test Framework Design
设计测试框架, 模拟测试数据
d) Implementation skills
设计的实现
e) Algorithm design
算法设计
Imagine we’re building a tall office building,configuration about elevators:
The Building has 21 floors, 4 elevators, many passengers use these elevators everyday (passenger weight: average 70kg. max 120kg, min 40g).
Other constant data: Elevator speed, door open/close time, passenger time for going in/out of the elevator. We can make reasonable assumptions about these.
The building has 21 floors, from floor 0, 1, ... to 20. Floor 0 is the underground parking level, floor 1 is the lobby level. Most people come in/out the building via these 2 floors.
Elevator name | Service floor list | Passenger limit | Weight limit |
1 | All floors | 10 | 800 kg |
2 | floor 1..10 | 10 | 800 kg |
3 | floor 0,1,2..10 | 20 | 1600 kg |
4 | floor 0,1, 11-20 | 20 | 2000 kg |
*note: in our test program, the configuration of elevators can be changed, the scheduler need to read the configuraiton at the initialization time via the API.
2.1 Each pair of students will design a set of interface and class definition so that an algorithm provider can provide his/her implementation to the “elevator scheduler” class.
2.2
each pair will focus on the implementation of the “elevator scheduler” program.
consideration for the API:
a) how to keep it simple.
b) how to provide enough info for the scheduler to finish the scheduling work, without knowing too much info?
c) which component is actually driving the elevator?
d) how to regulate proper passenger behavor? (e.g. if a passenger needs to go to floor 3 from floor 20, but the current elevator can’t go there directly, what should the passenger do?)
consideration for the test framework:
a) how to make sure it generates the same result for the same test cases on a given scheduler?
b) how to check the correctness of the scheduler?
c) how to prevent “cheating” by the scheduler?
d) how to emulate the “real world” efficiently? (e.g. if 2 passengers are 30 minutes away, does the test framework need to wait for 30 minutes?)
TA will come up with a consistent testing model to test your program according to the “rush hour” scenario (see below), and record the total travel time of all passengers.
You (student pair) have:
2.5Explanation of BUS program:
We can have a worst case algorithm called “bus”.This algorithm treats an elevator as a bus,it goes from bottom to top,stops at every floor, open the door, to let people in and out,then close the door and move on.After it reaches the top floor, it will go down.This algorithm can serve all requests, but it’s apparently not the fastest algorithm.
Your code is required to be managed code (C#, managed C++, etc).
It has to generate 0 (zero) Code Analysis warnings and errors. ( link for Code Analysis in Visual Studio)
It has to be correct, all passengers can reach their destinations
It should be as fast as possible.
It should not have randomness in scheduling (this is to avoid randomness in testing).
Score guideline:TA will evaluate the “average total travel time” for all passengers in the same test case, the lower, the better. If your performance is lower than “bus” solution, you get 0 points; if your program can’t deliver any passenger to the correct destination, you get 0 points.
One hint about elevator scheduling: When total weight is within 40 kg of the max limit, or the number of passengers is already at maximum, the elevator doesn’t need to stop for more external requests.
The elevator scheduler program doesn’t know how many passengers are waiting on each floor,it doesn’t know how many passengers will show up either.This is the same with the real world situation.
TA will simulate a “rush hour” test.The “rush hour” test is to simulate the come-to-work and leave-work scenario in a business building, which has the following 2 parts (they can be run next to each other).
20 people going thru random floors within 5 minutes.
另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。