189 8069 5689

nagios安装配置说明(一)-创新互联

Nagios安装配置说明

[root@nagios ~]# cd/etc/yum.repos.d/

[root@nagios yum.repos.d]# ls

CentOS-Base.repo CentOS-Debuginfo.repo CentOS-Media.repo CentOS-Vault.repo

[root@nagios yum.repos.d]# mvCentOS-Base.repo CentOS-Base.repo.backup

[root@nagios yum.repos.d]# wgethttp://mirrors.sohu.com/help/CentOS-Base-sohu.repo

--2014-06-08 22:34:38-- http://mirrors.sohu.com/help/CentOS-Base-sohu.repo

Resolving mirrors.sohu.com...119.188.36.70

Connecting tomirrors.sohu.com|119.188.36.70|:80... connected.

HTTP request sent, awaitingresponse... 200 OK

Length: 2299 (2.2K)[application/octet-stream]

Saving to:`CentOS-Base-sohu.repo'

100%[===================================================================================>]2,299      --.-K/s  in 0.1s

2014-06-08 22:34:43 (20.6 KB/s)- `CentOS-Base-sohu.repo' saved [2299/2299]

[root@nagios yum.repos.d]# ls

CentOS-Base-sohu.repo CentOS-Base.repo.backup CentOS-Debuginfo.repo CentOS-Media.repo CentOS-Vault.repo

[root@nagios yum.repos.d]# mv CentOS-Base-sohu.repoCentOS-Base.repo

  • 解决perl编译问题;

[root@nagios ~]# echo 'exportLC_ALL=C'>> /etc/profile

[root@nagios ~]# tail -1/etc/profile

export LC_ALL=C

[root@nagios ~]# source/etc/profile

[root@nagios ~]# echo $LC_ALL

C

  • 关闭iptables防火墙;

[root@nagios ~]#/etc/init.d/iptables stop

[root@nagios ~]#/etc/init.d/iptables status

iptables: Firewall is notrunning.

[root@nagios ~]# chkconfigiptables off

[root@nagios ~]# chkconfig--list|grep iptables

iptables           0:off 1:off 2:off 3:off 4:off 5:off 6:off

  • 关闭selinux;

[root@nagios ~]# cat /etc/selinux/config

# This file controls the stateof SELinux on the system.

# SELINUX= can take one ofthese three values:

#    enforcing - SELinux security policy isenforced.

#    permissive - SELinux prints warningsinstead of enforcing.

#    disabled - No SELinux policy is loaded.

SELINUX=enforcing

# SELINUXTYPE= can take one ofthese two values:

#    targeted - Targeted processes areprotected,

#    mls - Multi Level Security protection.

SELINUXTYPE=targeted

[root@nagios ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g'/etc/selinux/config

[root@nagios ~]# cat/etc/selinux/config

# This file controls the stateof SELinux on the system.

# SELINUX= can take one ofthese three values:

#    enforcing - SELinux security policy is enforced.

#    permissive - SELinux prints warningsinstead of enforcing.

#    disabled - No SELinux policy is loaded.

SELINUX=disabled

# SELINUXTYPE= can take one ofthese two values:

#    targeted - Targeted processes areprotected,

#    mls - Multi Level Security protection.

SELINUXTYPE=targeted

[root@nagios ~]# setenforce 0

[root@nagios ~]# getenforce

Disabled

五、解决时间同步问题;

[root@nagios ~]#/usr/sbin/ntpdate pool.net.org  #更新当前时间

 8 Jun 22:55:22 ntpdate[2165]: no serversuitable for synchronization found

[root@nagios ~]# echo '#timesync by jerry at 20140131'>> /var/spool/cron/root

[root@nagios ~]# echo '*/10 * ** * /usr/sbin/ntpdate pool.ntp.org >/dev/null 2>&1'>>/var/spool/cron/root

[root@nagios ~]# crontab -l

#time sync by jerry at 20140131

*/10 * * * * /usr/sbin/ntpdatepool.ntp.org >/dev/null 2>&1

六、安装nagios所需的基础软件包;

[root@nagios ~]# yum installgcc glibc glibc-common gd gd-devel mysql* httpd php php-gd –y

七、创建用户和组;

[root@nagios ~]# useradd nagios

[root@nagios ~]# groupaddnagcmd

[root@nagios ~]# usermod -a -Gnagcmd nagios

[root@nagios ~]# usermod -a -Gnagcmd apache

八、创建软件存放文件夹及下载相关软件;

[root@nagios tools]#mkdir –p /home/jerry/tools

[root@nagios tools]#cd/home/jerry/tools

九、解压并安装nagios;

[root@nagios tools]# tar zxfnagios-3.5.0-1374045102000.tar.gz

[root@nagios tools]# ls

nagios nagios-3.5.0-1374045102000.tar.gz nagios-plugins-1.5.tar.gz

[root@nagios tools]# cd nagios

[root@nagios nagios]#./configure --with-command-group=nagcmd

[root@nagios nagios]# make all

[root@nagios nagios]# makeinstall

[root@nagios nagios]# makeinstall-init

[root@nagios nagios]# makeinstall-config

[root@nagios nagios]# makeinstall-commandmode

十、安装nagios web 配置文件及创建登陆用户;

[root@nagios nagios]# makeinstall-webconf

/usr/bin/install -c -m 644sample-config/httpd.conf /etc/httpd/conf.d/nagios.conf

*** Nagios/Apache conf fileinstalled ***

[root@nagios nagios]# grep -v"#" /etc/httpd/conf.d/nagios.conf

ScriptAlias /nagios/cgi-bin"/usr/local/nagios/sbin"

  Options ExecCGI

  AllowOverride None

  Order allow,deny

  Allow from all

  AuthName "Nagios Access"

  AuthType Basic

  AuthUserFile/usr/local/nagios/etc/htpasswd.users

  Require valid-user

Alias /nagios"/usr/local/nagios/share"

  Options None

  AllowOverride None

  Order allow,deny

  Allow from all

  AuthName "Nagios Access"

  AuthType Basic

  AuthUserFile/usr/local/nagios/etc/htpasswd.users

  Require valid-user

[root@nagios nagios]# htpasswd-c /usr/local/nagios/etc/htpasswd.users nagiosadmin

New password:

Re-type new password:

Adding password for usernagiosadmin

十一、添加监控报警的接收email地址;

[root@nagios nagios]# vim/usr/local/nagios/etc/objects/contacts.cfg +35

email                          nagios@localhost

更改为

email                          46718718@qq.com

1.      启动sendmail时时间过长请检查主机名是否一致

[root@nagios nagios]#/etc/init.d/sendmail start

Starting sendmail: ^C

[root@nagios nagios]# cat/etc/hosts

127.0.0.1  localhost localhost.localdomain localhost4localhost4.localdomain4

::1        localhost localhost.localdomainlocalhost6 localhost6.localdomain6

[root@nagios nagios]# uname -n

Nagios

修改为:

[root@nagios nagios]# cat/etc/hosts

127.0.0.1  nagios localhost.localdomain localhost4 localhost4.localdomain4

::1        localhost localhost.localdomainlocalhost6 localhost6.localdomain6

[root@nagios nagios]#/etc/init.d/sendmail start

Starting sendmail:                                        [ OK ]

Starting sm-client:                                       [ OK ]

[root@nagios nagios]# lsof -i:25

COMMAND PID USER  FD  TYPE DEVICE SIZE/OFF NODENAME

master 1771 root  12u IPv4 11293     0t0 TCP nagios:smtp (LISTEN)

master 1771 root  13u IPv6 11295     0t0 TCP localhost:smtp (LISTEN)

[root@nagios nagios]# chkconfigsendmail on

[root@nagios nagios]# chkconfig--list|grep sendmail

sendmail         0:off 1:off 2:on 3:on 4:on 5:on 6:off

2.      启动apache;

[root@nagios nagios]# netstat-lnt|grep 80

tcp       0     0 :::80                      :::*                       LISTEN

[root@nagios nagios]# chkconfig--list|grep httpd

httpd            0:off 1:off 2:off 3:off 4:off 5:off 6:off

[root@nagios nagios]# chkconfighttpd on

[root@nagios nagios]# chkconfig--list|grep httpd

httpd            0:off 1:off 2:on 3:on 4:on 5:on 6:off

打开浏览器输入http://server-ip/nagios 会有一个用户名密码提示窗口,输入之前创建的用户名密码即可进入nagios系统页面。

另外有需要云服务器可以了解下创新互联scvps.cn,海内外云服务器15元起步,三天无理由+7*72小时售后在线,公司持有idc许可证,提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案,具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势,专为企业上云打造定制,能够满足用户丰富、多元化的应用场景需求。


文章题目:nagios安装配置说明(一)-创新互联
分享链接:http://jkwzsj.com/article/ejpei.html

其他资讯