189 8069 5689
脚本说明：
日志切割与上传类脚本的功能：脚本自身的运行日志记录与清理、日志切割与打包、ftp上传、传送失败自动重传、断电自动补传、清理超期旧打包等
--------------------
#!/bin/bash
# Cut and upload aclog log
# by colin
# revision on 2016-06-15
########################################
# 功能说明：该脚本运用于上传aclog日志
#
# 使用说明：
#+ ./aclog_backup_and_upload.sh -f /var/log/host/jnxac.log -t tar -h SDQD-TS-JNX-HLS
# 更新说明：
#
########################################
#sleep 60 #延时60秒运行
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
RUN_LOG='/var/log/cron_scripts_run.log'
[ ! -f ${RUN_LOG} ] && touch ${RUN_LOG}
echoGoodLog(){
echo -e "\033[32m`date +%F" "%T":"%N` $*\033[0m" >> ${RUN_LOG}
}
echoBadLog(){
echo -e "\033[31m`date +%F" "%T":"%N` $*\033[0m" >> ${RUN_LOG}
}
echoGoodLog "Now, Script: `basename $0` run."
RUNLOG_MAX_NUM=100000
RUNLOG_MAX_DELNUM=5000
SEND_MAX_TIME=6
SEND_WHILE_SLEEP_TIME=30
BACK_SAVE_MAX_DAY=180
LOG_CUT_MIN=60 # 日志文件30分钟切割一次
cleanRunLog(){
CLEANLOGFILE=${1?"Usage: $FUNCNAME log_file_name"}
TEMP_WC=`cat ${CLEANLOGFILE} |wc -l`
[ "${TEMP_WC}" -gt "${RUNLOG_MAX_NUM}" ] && {
sed -i "1,${RUNLOG_MAX_DELNUM}d" ${CLEANLOGFILE} && echoGoodLog "Clean up the ${CLEANLOGFILE}..."
}
echoGoodLog "Script: `basename $0` run done."
exit
}
##
# 省份数组
#
PROVINCE=(
sd
hlj
sc
)
##
# 脚本帮助提示函数
#
scriptsHelp(){
echoBadLog "======================================="
echoGoodLog "Usage parameters:"
echoGoodLog "./`basename $0` -f/--file /var/log/host/qfgw.log [-t/--tar tar] [-h/--hostname SDQD-TS-CL-WIN]"
echoGoodLog "Options:"
echoGoodLog " -f/--file)"
echoGoodLog " 必须的参数：需要切割与上传的日志文件"
echoGoodLog " -t/--tar)"
echoGoodLog " 可选参数：若需打包，使用方法： -t tar "
echoGoodLog " -h/--hostname)"
echoGoodLog " 可选参数：若一个站点存放了多个地方的相同类型日志，此时就需要设定每个日志所属站点"
echoGoodLog " 比如：昌乐的网关日志，没有HLS，日志存储在青岛北，那加参数如下：-h SDQD-TS-CL-WIN"
echoGoodLog " -c)"
echoGoodLog " 可选参数：用于检查日志服务器上是否有存储日志的文件夹，没有就创建，需使用except命令，会自动安装"
echoGoodLog " 注意：日志服务器必须要开放ssh远程登录，或者防火墙需要放行"
echoGoodLog " 使用方法：./`basename $0` -c ；-c后面不需要加选项"
echoGoodLog "Example:"
echoGoodLog "./`basename $0` -f /var/log/host/qfgw.log -t tar -h SDQD-TS-CL-WIN"
echoBadLog "======================================="
}
checkParameter(){
PARAMETER=${1:-null}
PARAMETER_STATUS=`echo "${PARAMETER}" |grep "^-"|wc -l`
if [ "${PARAMETER_STATUS}" -eq 1 -o "${PARAMETER}" = "null" ];then
scriptsHelp
echoBadLog "参数错误，请重新输入。"
exit
fi
}
##
# 判断是否带参数
#
if [ -z "$*" ];then
scriptsHelp
exit
else
##
# 脚本传参数，调用相应的函数功能
#
while test -n "$1";do
case "$1" in
--file|-f)
shift
checkParameter $1
LOG_NAME=$1
;;
--tar|-t)
shift
checkParameter $1
CTAR=$1
;;
--hostname|-h)
shift
checkParameter $1
CHOSTNAME=$1
;;
-c)
CCHECK_LOG_SERVER_DIR=$1
;;
*)
echoBadLog "Unknown argument: $1"
scriptsHelp
exit
;;
esac
shift
done
fi
##
# 需要切割的日志为必须要的参数
#
checkParameter $LOG_NAME
IS_TAR=${CTAR:-notar}
HOSTNAME=${CHOSTNAME:-`hostname`}
TEMP_PRO=`echo ${PROVINCE[@]} |sed "s/ /|/g"`
STATION=`echo ${HOSTNAME} |awk -F- '{print $3}'|tr [A-Z] [a-z]`
STATION_TYPE=`echo ${HOSTNAME} |awk -F- '{print $2}'|tr [A-Z] [a-z]`
STATION_SITE=`echo ${HOSTNAME} |awk -F- '{print $1}'|tr [A-Z] [a-z] |grep -Eo "\b${TEMP_PRO}"`
#############################
# define the ftp client
LOG_TYPE="aclog"
LOG_TYPEB="aclog"
LCD_DIR="/data/${STATION}_log/${STATION}_${LOG_TYPE}"
# 日志服务器上的保存文件夹特例
#----------------------------
case ${STATION_SITE}${STATION_TYPE} in
#sdbs) CD_DIR="/${LOG_TYPEB}/${STATION_SITE}/qdjy/${STATION}/";;
sdbs) CD_DIR="/${LOG_TYPEB}/${STATION_SITE}/qdjy/";;
*) CD_DIR="/${LOG_TYPEB}/${STATION_SITE}/${STATION}/";;
esac
#############################
# define the ftp server
FTPSERVER='IP地址'
FTPUSER='用户名'
FTPPASSWD='密码'
SSHPORT='端口'
#############################
T=`echo $(date +%k) |sed 's/ //g'`
#LAST_T=`echo $(date -d "1 hour ago" +%k) |sed 's/ //g'`
DAY_TIME=`date +%Y-%m-%d`
LAST_DAY_TIME=`date -d "yesterday" +%Y-%m-%d`
LAST_HOUR_TIME=`date +%Y-%m-%d-%H`
FILENUM=`expr $(date +%M|sed 's/^0//g') / ${LOG_CUT_MIN}`
DAY_LOG_TAR_NUM="${FILENUM}"
[[ "${FILENUM}" -eq 0 ]] && {
FILENUM=`expr 60 / ${LOG_CUT_MIN}`
LAST_HOUR_TIME=`date -d "1 hour ago" +%Y-%m-%d-%H`
}
##
# 为兼容旧版本，当60分钟切割一次时，就和之前旧版本文件名一样咯
#
if [ ${LOG_CUT_MIN} -eq 60 ];then
LOG_HOUR_NAME="${LOG_TYPE}${LAST_HOUR_TIME}.txt"
else
LOG_HOUR_NAME="${LOG_TYPE}${LAST_HOUR_TIME}-${FILENUM}.txt"
fi
LOG_DAY_NAME="${LOG_TYPE}${LAST_DAY_TIME}.txt"
case "${IS_TAR}" in
"tar")
PUT_LOG_DAY_NAME="${LOG_DAY_NAME%.txt}.tar.gz"
PUT_LOG_HOUR_NAME="${LOG_HOUR_NAME%.txt}.tar.gz"
;;
"notar")
PUT_LOG_DAY_NAME="${LOG_DAY_NAME}"
PUT_LOG_HOUR_NAME="${LOG_HOUR_NAME}"
;;
esac
tarLogFile(){
TARTONAME=${1?"Usage: $FUNCNAME tar_file_name need_tar_file_name"}
FROMLOG=$2
tar -czf ${TARTONAME} --remove-files ${FROMLOG}
if [ -e ${TARTONAME} ];then
echoGoodLog "Tar: ${TARTONAME} is successfully."
else
echoBadLog "Tar: ${TARTONAME} was failed, Please check..."
fi
}
checkProgramExist(){
PROGRAMNAME=${1?"Usage: $FUNCNAME program_install_name"}
PROGRAMEXIST=`dpkg -l |grep -wo ${PROGRAMNAME}|wc -l`
if [ "${PROGRAMEXIST}" -ge 1 ];then
return 0;
else
/usr/bin/apt-get install ${PROGRAMNAME} -y
if [ $? -eq 0 ];then
echoGoodLog "Install ${PROGRAMNAME} is successfully."
return 0;
else
echoBadLog "Install ${PROGRAMNAME} was failed, Please check..."
return 1;
fi
fi
}
checkLogServerDir(){
checkProgramExist expect
passwd=${FTPPASSWD}
/usr/bin/expect <<-EOF
set time 1
spawn ssh -p${SSHPORT} ${FTPUSER}@${FTPSERVER}
expect {
"*yes/no" { send "yes\r"; exp_continue }
"*password:" { send "$passwd\r" }
}
expect "*~$"
send "cd /home/upload${CD_DIR}\r"
expect {
"*No such file or directory" { send "mkdir -p /home/upload${CD_DIR}\r" }
}
expect "*~$"
send "exit\r"
interact
expect eof
EOF
echo -e "\r"
}
[ ! -d ${LCD_DIR} ] && mkdir -p ${LCD_DIR}
##
# 若切割后的日志文件存在时，就退出切割命令等
#
cd ${LCD_DIR} && [ ! -f ${PUT_LOG_HOUR_NAME} ] && {
if [ -s ${LOG_NAME} ];then
until [ -f ${LOG_HOUR_NAME} ]
do
cp ${LOG_NAME} ${LOG_HOUR_NAME}
done
if [ $? -eq 0 -a -f "${LOG_HOUR_NAME}" ];then
echoGoodLog "Create ${LOG_HOUR_NAME} is successfully."
else
echoBadLog "Create ${LOG_HOUR_NAME} was failed, Please check..."
fi
[ "${IS_TAR}" = "tar" ] && tarLogFile ${PUT_LOG_HOUR_NAME} ${LOG_HOUR_NAME}
if [ "${T}" -eq 0 -a "${DAY_LOG_TAR_NUM}" -eq 0 ];then
TEMP_CHECK_LOG=`ls -l ${LOG_DAY_NAME} |awk '{print $5}'`
cat ${LOG_NAME} >> ${LOG_DAY_NAME}
[ $? -eq 0 ] || cat ${LOG_NAME} >> ${LOG_DAY_NAME}
CHECK_LOG=`ls -l ${LOG_DAY_NAME} |awk '{print $5}'`
else
[ -f ${LOG_TYPE}${DAY_TIME}.txt ] || touch ${LOG_TYPE}${DAY_TIME}.txt
TEMP_CHECK_LOG=`ls -l ${LOG_TYPE}${DAY_TIME}.txt |awk '{print $5}'`
cat ${LOG_NAME} >> ${LOG_TYPE}${DAY_TIME}.txt
[ $? -eq 0 ] || cat ${LOG_NAME} >> ${LOG_TYPE}${DAY_TIME}.txt
CHECK_LOG=`ls -l ${LOG_TYPE}${DAY_TIME}.txt |awk '{print $5}'`
fi
echoGoodLog "CHECK: CHECK_LOG=${CHECK_LOG},TEMP_CHECK_LOG=${TEMP_CHECK_LOG}..."
if [ "${CHECK_LOG}" -gt "${TEMP_CHECK_LOG}" ];then
cat /dev/null > ${LOG_NAME}
[ $? -eq 0 ] && echoGoodLog "Append: ${LOG_HOUR_NAME} to ${LOG_TYPE}_day_log is successfully."
else
echoBadLog "Append: ${LOG_HOUR_NAME} to ${LOG_TYPE}_day_log was failed, Please check..."
fi
[ "${T}" -eq 0 -a "${IS_TAR}" = "tar" -a "${DAY_LOG_TAR_NUM}" -eq 0 ] && tarLogFile ${PUT_LOG_DAY_NAME} ${LOG_DAY_NAME}
else
echoBadLog "Log: ${LOG_NAME} is null or not exist, Please check..."
fi
}
##
# 检查保存文件夹目录是否存在
#
CHECK_LOG_SERVER_DIR=${CCHECK_LOG_SERVER_DIR:-"f.ck"}
[ "${CHECK_LOG_SERVER_DIR}" = "-c" ] && checkLogServerDir
FTP_LOG_DIR="/tmp/ftp_err"
[ -d ${FTP_LOG_DIR} ] || mkdir -p ${FTP_LOG_DIR}
FTP_ERROR_LOG="${FTP_LOG_DIR}/ftp_temp_${LOG_TYPE}_err$$.log"
##
# FTP自动化上传函数
#
sendLog(){
SENDLOGFILE=$1
ftp -ivn ${FTPSERVER} 21 >${FTP_ERROR_LOG} << _EOF_
user ${FTPUSER} ${FTPPASSWD}
passive
bin
lcd ${LCD_DIR}
cd ${CD_DIR}
put ${SENDLOGFILE}
bye
_EOF_
##
# 统计前面FTP运行输出的错误日志记录行数
#
LOG_COUNT=`grep -w "^226" ${FTP_ERROR_LOG}|wc -l`
if [ "${LOG_COUNT}" -eq 1 ];then
echoGoodLog "Send: ${SENDLOGFILE} to ftp_server was successfully."
TEMP_SEND_STATUS=0
return 0
else
echoBadLog "Send: ${SENDLOGFILE} more than $x time."
TEMP_SEND_STATUS=1
sleep ${SEND_WHILE_SLEEP_TIME}
return 1
fi
}
REUPLOADLIST="/var/log/reupload_list_${LOG_TYPEB}_${STATION}.log"
TEMP_REUPLOADLIST="/var/log/temp_reupload_list_${LOG_TYPEB}_${STATION}.log"
[ -f ${TEMP_REUPLOADLIST} ] && rm ${TEMP_REUPLOADLIST}
runSendLog(){
SENDLOGNAME=$1
x=1;i=1
until [ "$i" -eq 0 ];do
[ "$x" -gt "${SEND_MAX_TIME}" ] && {
echoBadLog "Send: ${SENDLOGNAME} to ftp_server was failed, Please check..."
echo "${LCD_DIR};;${CD_DIR};;${SENDLOGFILE}" >> ${TEMP_REUPLOADLIST}
break
}
sendLog "${SENDLOGNAME}"
i=`echo $?`
x=`expr $x + 1`
done
}
[ "${T}" -eq 0 -a -f "${LCD_DIR}/${PUT_LOG_DAY_NAME}" -a "${DAY_LOG_TAR_NUM}" -eq 0 ] && runSendLog ${PUT_LOG_DAY_NAME}
[ -f "${LCD_DIR}/${PUT_LOG_HOUR_NAME}" ] && runSendLog ${PUT_LOG_HOUR_NAME}
##
# 把上面两种发送成功的记录更新到这个临时文件
#
TEMP_SENDSUCCESFILE="/var/log/temp_send_succes_${LOG_TYPEB}_${STATION}.txt"
SENDSUCCESFILE="/var/log/send_succes_${LOG_TYPEB}_${STATION}.txt"
[ "${TEMP_SEND_STATUS}" -eq 0 ] && echo "${LCD_DIR};;${CD_DIR};;${SENDLOGFILE};;$(date +%s)" > ${TEMP_SENDSUCCESFILE}
[ -e ${SENDSUCCESFILE} ] && {
LCD_DIR=`cat ${SENDSUCCESFILE}|awk -F";;" '{print $1}'`
CD_DIR=`cat ${SENDSUCCESFILE}|awk -F";;" '{print $2}'`
LAST_DATE_SUCCESS=`date -d @"$(cat ${SENDSUCCESFILE}|awk -F";;" '{print $4}')" +%Y-%m-%d`
INTERVAL_TIME=`expr $(date +%s) - $(cat ${SENDSUCCESFILE}|awk -F";;" '{print $4}')`
LAST_DAY=`echo $(date -d @"$(cat ${SENDSUCCESFILE}|awk -F";;" '{print $4}')" +%d)|sed 's/^0//g'`
NOW_DAY=`echo $(date +%d)|sed 's/^0//g'`
[ "${LAST_DAY}" -ne "${NOW_DAY}" -a "${INTERVAL_TIME}" -gt 7000 ] && {
if [ "${IS_TAR}" = "tar" ];then
cd ${LCD_DIR} && {
TEMP_SEND_FILES="${LOG_TYPE}${LAST_DATE_SUCCESS}.tar.gz"
[ -e ${TEMP_SEND_FILES} ] || tarLogFile ${TEMP_SEND_FILES} ${LOG_TYPE}${LAST_DATE_SUCCESS}.txt
}
else
TEMP_SEND_FILES="${LOG_TYPE}${LAST_DATE_SUCCESS}.txt"
fi
runSendLog ${TEMP_SEND_FILES}
}
rm ${SENDSUCCESFILE}
}
[ -f ${TEMP_SENDSUCCESFILE} ] && mv ${TEMP_SENDSUCCESFILE} ${SENDSUCCESFILE}
##
# 重传上次发送失败的文件
#+ 说明：重新上传函数的执行段，最好是放在后面，因为它依赖前面的FTP发送函数生成的TEMP_REUPLOADLIST清单
#
reUploadFile(){
TEMP_NEED_DO_FILE=$1
REUPLOADLIST_NUM=`cat ${TEMP_NEED_DO_FILE}|wc -l`
[ "${REUPLOADLIST_NUM}" -ge 1 ] && {
while read line
do
LCD_DIR=`echo ${line}|awk -F";;" '{print $1}'`
CD_DIR=`echo ${line}|awk -F";;" '{print $2}'`
REUPLOADFILENAME=`echo ${line}|awk -F";;" '{print $3}'`
[ -f "${LCD_DIR}/${REUPLOADFILENAME}" ] && runSendLog ${REUPLOADFILENAME}
done < ${TEMP_NEED_DO_FILE}
}
[ -e ${TEMP_NEED_DO_FILE} ] && rm ${TEMP_NEED_DO_FILE}
}
[ -s ${REUPLOADLIST} ] && reUploadFile ${REUPLOADLIST}
[ -f ${TEMP_REUPLOADLIST} ] && mv ${TEMP_REUPLOADLIST} ${REUPLOADLIST}
[ -f ${FTP_ERROR_LOG} ] && rm ${FTP_ERROR_LOG}
##
# 清理超过90天的备份日志
#
[ -d ${LCD_DIR} ] && cd ${LCD_DIR} && {
for FILENAME in `find . -type f -ctime +"${BACK_SAVE_MAX_DAY}" | awk -F/ '{print $2}'`
do
rm ${FILENAME} && echoGoodLog "Clear: ${LCD_DIR}/${FILENAME}..."
done
}
cleanRunLog ${RUN_LOG}--------------------
另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。